GALA®

Do you really need the maximum heat output of a fireplace? The current building regulations prescribe an isolation level to reduce the energy requirements. We allow you to chose your heat output yourself!

With an A+ eco-label classification and over 90% of efficiency for balanced flue fires, we are ready for the future.

4 kinds of heat can be recuperated from the GALA® gasfires. Radiant heat, convection heat, heat from decompressing the chimney mantel and radiant heat from the chimney tubes.

Radiant heat is the primary heat output of the GALA® gasfire.

Cover the convection system completely and apply ceramic isolation blanket on the fireplace mantel to reduce the heat output to the radiant heat.

GALA® gasfires are build with a patented technique to make sure the fireplace will not deform and get overheated!

Use 1 or 2 convection (fresh) air inlet(s) and put a focus to 1 convection (hot) air outlet.

! For B11 Classic flue fires, flexible tubes and an air vents are required !

Connect both air inlets and both air outlets, in combination with radiant to get the full heat output.

! For B11 Classic flue fires, flexible tubes and an air vents are required !

The flame is the most important visual feature of a gasfire.

Our in-house R&D department, carefully developed 2 burner systems. Created with attention to the flame color, -height and today's emission values.

Our burners are available for Natural gas, LPG, Propane, Butane, Biogas and Citygas.

Our single line-burner covers the full length of a GALA® combustion chamber.

A 50mm flame line with changing pattern creates a contemporary gas-fire look. The flame height varies around 20cm*. Available for all gas types.

Vero Design's latest burner development!

Creating a square of rectangular burner with a flame height around 50cm*, available for all gas types

Safety is a core-value that is important with the construction of every fireplace. Vero Design fireplaces have build-in several security systems to monitor over your safety.

Annually audits by DVGW CE certification office assures the certainty that all safety regulations remain guaranteed

The safety socket and gas flexible guarantees a leak-free plug & play connection on the gasnetwork.

The additional safety will close the gasvalve in case of over heating

The pilot flame is the primary security system. At startup, just limit gas is released to ignite the fire without a risk of explosion.

A build-in ionization device monitors permanently over the combustion.

Premium Anti-Reflective Glass creates the illusion of an open fireplace.

Multiple anti-reflective layers are given to the Premium Ceramic Glass, reducing the reflection to nearly 1%.

Radiant heat, created in the combustion chamber, passes easily through so that is gradually fills the entire room  with a pleasant warmth.

A flat steel interior finished with heat resistant paint is the base of every GALA®

The Flame Reflex System acts as a mirror and duplicates the flames, creating a more full combustion chamber and double fire effect. Depending on the color of the GALA® fireplace, the FRS is made from black or transparent glass.

So fresh that we only have proto-typing pictures!

The full interior can be created in a high quality steel ribbed look, the finishing touch for the GALA® fireplace is the ribbed grate, in combination with the flatbed burner creating a real wood fire experience.

Controlling the fire with a radio-frequency remote control giving you a great comfort.

Build-in features: high/low in 15 steps, wave- and a thermostatic function.

For your maximum comfort, control the fireplace with your home control / domotica system.

Installation and domotica system is not supplied by Vero Design